Avantone Pro CK-7
Multi-Pattern Condenser Microphone
Avant’s CK-7 is a transformer-coupled large-diaphragm FET condenser with three pickup patterns: cardioid, omni, figure-8.
Onboard switches provide access to a -10dB pad and a high-pass filter (-6dB/octave below 80Hz).
The mic’s capsule is a dual-diaphragm, multipattern design. The capsule diameter is 35mm; the Mylar diaphragms measure approximately 30mm across, and are center-terminated.
The CK-7 ships with an elastic shockmount, a wooden storage case, and an aluminum flightcase.
The Avantone Pro CK-7 is also known as: CK7.
The mic was released in 2006.
Specifications
| Frequency Response - OmnidirectionalClick Graph to Compare! |
|---|
 |
| Frequency Response - CardioidClick Graph to Compare! |
 |
| Frequency Response - BidirectionalClick Graph to Compare! |
 |
| Pickup Patterns | Pads & Filters |
|---|---|
|
Omnidirectional
(12.6 mV/Pa; 20 - 20,000 Hz) Cardioid (12.6 mV/Pa; 25 - 20,000 Hz) Bidirectional (12.6 mV/Pa; 38 - 20,000 Hz) |
|
| Capsule Dimensions | Impedance | SPL/Noise |
|---|---|---|
| Diaphragm diameter: 30mm Capsule diameter: 35mm |
250 Ohms (Low) | Max SPL: 139 dB Self-noise: 16.0 dB(A) |
| Weight | Length | Max Diameter | Interface(s) |
|---|---|---|---|
| 650g (22.93oz) | 187mm (7.36'') | 51mm (2.01'') |
|
| Power Specifications |
|---|
|
Did we get anything wrong on this page? Please let us know!