

Behringer B-2 Pro
Multi-Pattern Condenser Microphone
The Behringer B-2 Pro is a multipattern large diaphragm FET condenser. It appears to be identical internally to the NT2S from 797 Audio.
The circuit board is built with through-hole components, facilitating DIY mods and upgrades.
The mic uses a dual-diaphragm capsule that is shockmounted within the headbasket. A switch on the mic body allows selection of three polar patterns: Cardioid, Omni, or Figure-8.
A -10dB attenuation and 125Hz low cut are available via switches on rear of the mic body.
Included accessories for the B-2 Pro: aluminum case, foam wind filter, shock mount.
Permalink: Behringer B-2Pro
The mic was released in 2002.
Specifications
Pickup Patterns | Pads & Filters |
---|---|
Omnidirectional
(14 mV/Pa; 20 - 20,000 Hz) Cardioid (16 mV/Pa; 20 - 20,000 Hz) Bidirectional (18 mV/Pa; 20 - 20,000) |
|
Capsule Dimensions | Impedance | SPL/Noise |
---|---|---|
Diaphragm diameter: 25mm |
100 Ohms (Low) | Max SPL: 149 dB Self-noise: 18.0 dB(A) |
Weight | Length | Max Diameter | Interface(s) |
---|---|---|---|
550g (19.40oz) | 210mm (8.27'') | 56mm (2.20'') |
|
Power Specifications |
---|
|
Did we get anything wrong on this page? Please let us know!