recordinghacks

AKG Acoustics C 562 CM

Omnidirectional Boundary Microphone

• Small, low-profile boundary layer microphone
• Wide frequency range
• High sensitivity
• Ideal for inconspicuous installation in a room
• Suited for surveillance or recording

The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, “invisible” mounting in ceilings, walls, tables, stage props, etc.

Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.

The AKG Acoustics C 562 CM is also known as: C562CM, C 562 CM.

Specifications

Pickup Patterns	Pads & Filters
Omnidirectional (25 mV/Pa (-32 dBV) mV/Pa; 20 to 20,000 Hz)

Capsule Dimensions	Impedance	SPL/Noise
n/a	600 Ohms (Low)	Max SPL: 130 dB

Weight	Length	Max Diameter	Interface(s)
30g (1.06oz)	28mm (1.10'')	20mm (0.79'')	3-pin XLR male (1)

Power Specifications
Requires phantom power Phantom voltage: 9 to 52 V phantom power tv

Did we get anything wrong on this page? Please let us know!